Sound Skulptor forums

Build help and troubleshooting => EQP501 Passive Equalizer => Topic started by: jaqjen on May 28, 2021, 03:37:31 PM

Title: EQP501 setup
Post by: jaqjen on May 28, 2021, 03:37:31 PM

I just finished my first 500 series project!
I have a doubt in the setup, the values are not exactly between 15 and 16, but a little further: V + is 16.67: and V- is 16.58. Are those values correct?
DOA gives me 0.2 - 0.3.
Thank you!

Title: Re: EQP501 setup
Post by: JPK on May 29, 2021, 08:38:00 AM

Your voltage rail values are correct. They actually depend on your lunchbox PSU.

Quote

DOA gives me 0.2 - 0.3.

0.2 Volts or millivolts?

Title: Re: EQP501 setup
Post by: jaqjen on May 29, 2021, 09:16:03 AM

miniVolts

Title: Re: EQP501 setup
Post by: JPK on May 31, 2021, 08:55:32 AM

Your values are good.

Title: Re: EQP501 setup
Post by: jaqjen on June 07, 2021, 11:00:16 AM

Thank you!
It has been very interesting to build the eqp, and very nice, everything is very well explained, and it fits great.
I have tried it and everything works fine, in principle.
The next thing will be a couple of tape simulators !!
All the best!

Title: Re: EQP501 setup
Post by: JPK on June 07, 2021, 04:02:55 PM

Congratulations!