Build help and troubleshooting => CP4500 Stereo Bus Compressor => Topic started by: AspieLibra on September 15, 2021, 03:34:25 AM
Title: Setup for Meter
Post by: AspieLibra on September 15, 2021, 03:34:25 AM
8.
Meter adjust
Press the IN switch to power on. Turn the THRESHOLD potentiometer counter clockwise until the output level drops to 0.5VAC. Adjust trimmer T4 in order to read 12 dB attenuation on the meter.
so with a 2vac 1k tone, the threshold knob ends up at about 2 o'clock at .5vac.
I do not have enough adjustment on the trimmer to get to 12 DB.
Title: Re: Setup for Meter
Post by: JPK on September 15, 2021, 10:49:49 AM
Something is wrong. Please do the measurements here : https://www.soundskulptor.com/forum/index.php?topic=3.0