Sound Skulptor forums

Build help and troubleshooting => MC624 Monitor Controller => Topic started by: 80icio on November 14, 2021, 06:59:18 PM

Title: 1% resistors
Post by: 80icio on November 14, 2021, 06:59:18 PM

Hi, I'm about to buy the monitor controller.
I'm just wondering if the 1% tolerance resistors would end up to have too much asymmetry on the outputs.
are the resistors stereo matched? do you think 1% tolerance is ok?

Title: Re: 1% resistors
Post by: JPK on November 15, 2021, 11:09:18 AM

A 1% deviation between channels is a 0.09dB difference which is below the noticeable level.