Sound Skulptor forums

Build help and troubleshooting => First Aid => Topic started by: b.riesel on May 27, 2022, 09:09:49 AM

Title: Problems identifing Parts
Post by: b.riesel on May 27, 2022, 09:09:49 AM

Hi guys
i´m an absolutely DIY-beginner and started to build my firstr CP5176.
Identiofing the Resistors was easy. But now i have to identify the Ceramic Capacitors. On some, i can read the marking. On the blue ones, it´s impossible to read the marking. When i measure with the ultimeter, i get values, that are only near the value at the part list.
Is there a "right" way, to cope with that?
best regards
stefan

Title: Re: Problems identifing Parts
Post by: JPK on May 27, 2022, 11:18:49 AM

Actually, it is possible (even if difficult) to read the marking on the blue ceramics with a good magnifying glass and good light.
Other than that, multimeter and deduction are the way to go.