Sound Skulptor forums

Build help and troubleshooting => CP5176 FET compressor => Topic started by: Danchinho on July 06, 2022, 07:34:27 PM

Title: JMP 1
Post by: Danchinho on July 06, 2022, 07:34:27 PM

Hi,
After soldering JMP 1 on stage 11 of the build, solder one and then check it's vertical then solder the other pins....
Do we trim those pins afterwards?

Title: Re: JMP 1
Post by: Danchinho on July 08, 2022, 07:13:34 PM

anyone have any experience of this?

Title: Re: JMP 1
Post by: JPK on July 09, 2022, 09:46:18 AM

The pins are short and don't need to be trimmed.
Look at the picture after step 18.