Sound Skulptor forums

Build help and troubleshooting => LA502 Optical Compressor => Topic started by: DUYBuilder on September 07, 2022, 06:17:06 PM

Title: Error is setup documentation?
Post by: DUYBuilder on September 07, 2022, 06:17:06 PM

On https://www.soundskulptor.com/docs/la502-setup-guide-01.pdf (https://www.soundskulptor.com/docs/la502-setup-guide-01.pdf)
Step one says:  IMPORTANT: It is necessary to turn the seven trimmer potentiometers all the way counter clockwise before start. These trimmers are 20 turns so that's a lot of turns to do

But there are only 3 trimmers.

Is this documentation up to date?

Title: Re: Error is setup documentation?
Post by: JPK on September 09, 2022, 09:08:31 AM

This is the documentation for the previous PCB versions: before REV1.4
The correct documentation for REV1.4 is available at https://www.soundskulptor.com/en/docs.php
in the DOCS-24 tab.