Sound Skulptor forums

Build help and troubleshooting => CP4500 Stereo Bus Compressor => Topic started by: hasanova on October 16, 2022, 11:52:27 PM

Title: Stereo Linking
Post by: hasanova on October 16, 2022, 11:52:27 PM

Question:
Do I need to use a stereo linking switch on my 500 series rack?

I have a Midas Legend L10 rack. This switch s called "COMP BUS" switch. In the manual is stated:

"COMP BUS - These switches are
used for those compressors that
allow linking together for stereo
or multi-channel compressor
applications. Only certain
compressors have this feature,
and our current MIDAS 522
compressor/limiter does not."


When I did the calibration, I used two extenders but I don't know if the switch was "in" or not...

Title: Re: Stereo Linking
Post by: JPK on October 17, 2022, 04:48:44 PM

No need of stereo link. The 2 channels are permanently linked.