Sound Skulptor forums

Build help and troubleshooting => CP5176 FET compressor => Topic started by: charnicero on May 22, 2023, 09:58:34 AM

Title: Setup step 4 values not as precise as expected
Post by: charnicero on May 22, 2023, 09:58:34 AM

Hi:
I've completed the assembly of the CP5176 module. When I've started the test, using an API 500V lunchbox and the extension module, at step 4, the voltages that I get are OV-V+ 15,96v, OV-V- 16,08 and OV-TP7 5,42v. The V- and the TP7 values are not as expected in the setup guide, so, there is anything I can do to get that 5,5v expected at TP7? Is this value critical?
Thnks

Title: Re: Setup step 4 values not as precise as expected
Post by: JPK on May 26, 2023, 04:51:46 PM

The values you get are correct, within the tolerance range.