Show Posts
1
CP4500 Stereo Bus Compressor / Informative: Check continuity on boards C51-R102 (batch May 2021)
« on: May 30, 2021, 02:51:45 PM »
Just made the 1st startup on my new CP 4500 and i had around -6.2 Volts were the +12V should be.
On my board the tiny fine trace between C51 and R102 made no coninuity.
So in case you experience a similar result, check there.
Cheers
art
On my board the tiny fine trace between C51 and R102 made no coninuity.
So in case you experience a similar result, check there.
Cheers
art