3. Informative: Check continuity on boards C51-R102 (batch May 2021)
« previous next »
Pages: [1]

Author Topic: Informative: Check continuity on boards C51-R102 (batch May 2021)

May 30, 2021, 02:51:45 PM
Read 1513 times

artQuake

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Informative: Check continuity on boards C51-R102 (batch May 2021)
Just made the 1st startup on my new CP 4500 and i had around -6.2 Volts were the +12V should be.

On my board the tiny fine trace between C51 and R102 made no coninuity.

So in case you experience a similar result, check there.

Cheers
art
Logged
May 31, 2021, 09:13:45 AM
Reply #1

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 1117
  • Karma: +37/-0
    • View Profile
Re: Informative: Check continuity on boards C51-R102 (batch May 2021)
Thank you for the tip.
Fortunately, this appears to be an isolated case. I have checked on a batch of board which all have the correct connection.
Logged
JPK
Pages: [1]
« previous next »
  3. Informative: Check continuity on boards C51-R102 (batch May 2021)