Hi,
it's my 6th build of a Sound Skulptor API 500 Module (MP5.66, EQ573, CP5176, MP573 and LA502)
![Wink ;)](https://www.soundskulptor.com/forum/Smileys/default/wink.gif)
Everything is working so far and calibration has been done.
One odd thing though: maybe it's too late and/or I'm stupid:
I feed a music signal (Stereo) and adjust the Threshold that the gain reduction meter barely moves.
Important: Ration is on 10!
When I reduce the ratio to 4 and 2 I expected that the gain reduction does NOT increase - but it does!
on Ratio 2 the reduction is the highest.
Am I completely mistaken or am I right that it should be the other way round?
Did I solder the wrong resistors to the rotary switch? double checked it but maybe still ...
![Shocked :o](https://www.soundskulptor.com/forum/Smileys/default/shocked.gif)
Any ideas what could be wrong?
the rest of functionality is as expected.
help greatly appreciated 😉