3. Low voltage check failed
« previous next »
Pages: [1]

Author Topic: Low voltage check failed

January 15, 2022, 11:07:44 PM
Read 1364 times

Claudio

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
  • DIY Junkie
    • View Profile
Low voltage check failed
Hello everyone,

When going through the MP566 test guide, I’m stuck at point 4 (Low voltage check). According to the documents I’m supposed to get a voltage between -3.8V and -5V between the TP8 and 0V test pins, but what I really get is -15V. What could I have done wrong?

Thanks,
Claudio

« Last Edit: January 15, 2022, 11:09:39 PM by Claudio »
Logged
January 15, 2022, 11:31:38 PM
Reply #1

Claudio

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
  • DIY Junkie
    • View Profile
Re: Low voltage check failed
Nevermind. Seems like there was a bad solder joint at the power-up PCB. Now it’s working as intended.
Logged
Pages: [1]
« previous next »
  3. Low voltage check failed