3. VAC output reads 0
« previous next »
Pages: [1]

Author Topic: VAC output reads 0

March 18, 2022, 06:19:51 PM
Read 1539 times

macguy78

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
VAC output reads 0
Hi it's me again. I'm having similar VAC output reading issues with my 502 as well; very low (around .130VAC) readings. I'm starting to think there may be a bad IC somewhere. Any help is always appreciated!
Logged
March 19, 2022, 06:14:40 PM
Reply #1

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 1117
  • Karma: +37/-0
    • View Profile
Re: VAC output reads 0
Check if you can measure the input signal on R1-right pin, against 0V.
Next, same thing on TP1
Logged
JPK
March 19, 2022, 07:37:41 PM
Reply #2

macguy78

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
Re: VAC output reads 0
I’ll try these tests out today. Thanks 
Logged
March 20, 2022, 03:53:30 AM
Reply #3

macguy78

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
Re: VAC output reads 0
After reflowing the components, I was able to get a proper reading. LA502 is up and running, properly calibrated. Thanks!!
Logged
Pages: [1]
« previous next »
  3. VAC output reads 0