[slothproductions]

Hello

I'm building the MP573. Unfortunately, I soldered a 4K7 resistor to R6 and cut the legs. I've changed R6 to the right value, but now I can't use the 4K7 resistor as R62 because of the vertical orientation, and I need a new one.

Are these kind of resistors metal film, and should I be aware of anything else other than value, size, tolerance and power rating when buying a replacement? 

/Simon

[JPK]

Yes, metal film, 0.25W or 0.4W or 0.6W, depending on the brand. All are OK.
Tolerance 1%.

[slothproductions]

Thanks!