[wenofyi]

I'm part way through my MP573 build and unless I have missed something, it looks like I am three capacitors short.

Here is where I am currently: 


I need C10, C11 and C12. These are listed in the instructions as "large electrolytics", but on the parts list they correspond to the 330u-25V capacitors, which I already used some of in the "small electrolytic capacitors" step. According to the parts list, I should have 9 total of the 330u-25V capacitors, but I only have 6. I have soldered 4 and have 2 remaining, but it looks like I will be needing those 2 for the DI PCB. I am using documentation version 21.

Here are the remaining components in my capacitor bag:


Here is the parts list entry in question:


Here is the documentation version I using:


Any guidance or suggestions would be greatly appreciated. Let me know if there is a way to be sent the missing capacitors.

Thanks!

[JPK]

This is probably an error from us, sorry for the inconvenience. We will send you the missing caps today.

[wenofyi]

No worries, thanks for the prompt reply!